User Tools

Site Tools


dmx_basics:dmx_addresses

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
dmx_basics:dmx_addresses [2012/09/09 22:14] djsupportdmx_basics:dmx_addresses [2022/11/29 21:54] (current) – [DMX Addresses.] djsupport
Line 14: Line 14:
 When the fixtures have received the address 0 synchronizations they count until there address is send and then start to listen.\\ When the fixtures have received the address 0 synchronizations they count until there address is send and then start to listen.\\
 Fixture 3 will wait until address 13 comes and it will then listen to the next 6 addresses.\\ Fixture 3 will wait until address 13 comes and it will then listen to the next 6 addresses.\\
-FreeStyler must be set to control this fixture on the same address so they match.\\+FreeStyler must be set to control this fixture on the same addressso they match.\\
 \\ \\
-The 6 addresses is the no of channel found in the DMX table for the fixture.\\+The 6 addresses are the no of channel found in the DMX table for the fixture.\\
 In the DMX table the channel function will be described from 1 to 6 and as the figure above shows this is an offset definition.\\ In the DMX table the channel function will be described from 1 to 6 and as the figure above shows this is an offset definition.\\
 \\ \\
 {{:dmx_basics:arc2_s.gif}}\\ {{:dmx_basics:arc2_s.gif}}\\
 \\ \\
-If a fixture are using 6 channel then in Fixture Creator the total no. of channels has to be 6.\\ +If a fixture are using 6 channelthen in Fixture Creator the total no. of channels has to be 6.\\ 
-If the total no. of channel is wrong then the fixture will still be listening on 6 channels and there is a risk mall function.\\+If the total no. of channel is wrongthen the fixture will still be listening on 6 channels and there is a risk mal function.\\
 If the number here is set to 5 instead of 6 then “fixture 2”-Strobe and “fixture 3”-Dimmer will react on the same channel and thereby malfunction.\\ If the number here is set to 5 instead of 6 then “fixture 2”-Strobe and “fixture 3”-Dimmer will react on the same channel and thereby malfunction.\\
 \\ \\
dmx_basics/dmx_addresses.1347228885.txt.gz · Last modified: 2013/03/12 21:32 (external edit)

Except where otherwise noted, content on this wiki is licensed under the following license: Public Domain
Public Domain Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki