The DMX Wiki

User Tools

Site Tools


dmx_basics:dmx_how_to_set_addresses

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
dmx_basics:dmx_how_to_set_addresses [2012/09/09 21:59]
127.0.0.1 external edit
dmx_basics:dmx_how_to_set_addresses [2013/03/12 22:03] (current)
Line 84: Line 84:
 So find the DMX Addressing menu and change the value with the up/down buttons.\\ So find the DMX Addressing menu and change the value with the up/down buttons.\\
 And find the wanted mode here “PERS” and for the fun of it, it could be a simple RGB mode, ARC1.\\ And find the wanted mode here “PERS” and for the fun of it, it could be a simple RGB mode, ARC1.\\
-Remember that the mode must match the fixture in FreeStyler.\\ +Remember that the mode must match the fixture in the DMX Software.\\ 
-If these two settings don't match then a address ​overlab will occur and the fixture control fail.\\+If these two settings don't match then a address ​overlabpwill ​occur and the fixture control fail.\\
 See. [[dmx_basics:​dmx_addresses|]]\\ See. [[dmx_basics:​dmx_addresses|]]\\
 \\ \\
Line 92: Line 92:
 \\ \\
 ---- ----
-\\+===== See Also ===== 
 +[[dmx_definitions:​dip_switches|Definition Page with Dip Switch Calculator]]
dmx_basics/dmx_how_to_set_addresses.txt · Last modified: 2013/03/12 22:03 (external edit)