The DMX Wiki

User Tools

Site Tools


dmx_definitions:dmx_cables

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
dmx_definitions:dmx_cables [2012/05/26 22:43]
127.0.0.1 external edit
dmx_definitions:dmx_cables [2013/03/12 22:03] (current)
Line 19: Line 19:
  
 The connectors with the holes are the out, think of it like a power socket, you cannot (would not) put you fingers in the socket and the power comes out of it. The in is the connectors with the pins, again think like a power plug, you can touch the pins and no harm is done and this goes '​IN'​ to the socket. As can be seen on the picture below, 'DMX **OUT**'​ is on the left and 'DMX **IN**'​ is on the right. The connectors with the holes are the out, think of it like a power socket, you cannot (would not) put you fingers in the socket and the power comes out of it. The in is the connectors with the pins, again think like a power plug, you can touch the pins and no harm is done and this goes '​IN'​ to the socket. As can be seen on the picture below, 'DMX **OUT**'​ is on the left and 'DMX **IN**'​ is on the right.
-{{  :definitions:​3-pin-dmx-connectors.jpg ​ |3-pin DMX Connectors, OUT on left and IN on right.}}+{{  :dmx_definitions:​3-pin-dmx-connectors.jpg ​ |3-pin DMX Connectors, OUT on left and IN on right.}}
  
 When connecting your fixtures with cables try to use the shortest cable possible, but not so short that it is stretched. When connecting your fixtures with cables try to use the shortest cable possible, but not so short that it is stretched.
Line 83: Line 83:
 | Recent Martin Professional fixtures are fitted with a set of jumpers on\\  the main PCB that allow you to reconfigure the pinout of the data connectors.\\ ​  ​Please consult your user manual to see if your fixture has this option, and\\  for instructions on how to change the settings. |||| | Recent Martin Professional fixtures are fitted with a set of jumpers on\\  the main PCB that allow you to reconfigure the pinout of the data connectors.\\ ​  ​Please consult your user manual to see if your fixture has this option, and\\  for instructions on how to change the settings. ||||
 == See Also: == == See Also: ==
-  * [[definitions:​DMX512|DMX-512]]+  * [[dmx_definitions:​DMX512|DMX-512]]
  
  
 ====== ====== ====== ======
 [[:​welcome|Back to DMX Wiki]] [[:​welcome|Back to DMX Wiki]]
dmx_definitions/dmx_cables.txt ยท Last modified: 2013/03/12 22:03 (external edit)