dmx_interfaces:cinetix_ethernet_dmx_generator_box
no way to compare when less than two revisions
Differences
This shows you the differences between two versions of the page.
Previous revision | |||
— | dmx_interfaces:cinetix_ethernet_dmx_generator_box [2013/03/12 22:03] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ====== Cinetix Ethernet DMX Generator Box ====== | ||
+ | {{ : | ||
+ | The Ethernet / DMX512 Generator is primarily designated to control a DMX512 - based lighting bus via Ethernet (DMX transmitter only) | ||
+ | For this purpose, the Ethernet / DMX512 Generator is configured as a TCP or UDP server. Control commands are given in compact ASCII text format. As an alternative, | ||
+ | |||
+ | It is a reduced version of the Ethernet / DMX512 Control Box without a DMX input. The capabilities of DMX transmission are almost identical. | ||
+ | |||
+ | Additionally, | ||
+ | |||
+ | Art-Net™ node: supports one universe of DMX OUT. In addition to the Art-Net primary IP and subnet configurations a user defined IP configuration is available, which allows better integration of the box into existing class C networks. | ||
+ | |||
+ | Serial communication node for TCP and UDP: retransmits any byte received via Ethernet through its serial interface (supported formats: MIDI, RS-232. RS-422) and vice versa retransmits any byte received at the serial interface via Ethernet. The serial or MIDI connection is provided by a special adaptor cable which is plugged on the DMX OUT socket. The wiring of these cables is documented in the manual of the Ethernet / DMX Generator. | ||
+ | |||
+ | Besides PC standard baud rates (9600, 19200, 38400, 57600, 115200 - byte format 8N1 no handshake) especially the MIDI interface is supported. A fully featured optoisolated MIDI input is available. | ||
+ | |||
+ | The Ethernet / DMX512 Generator can be operated with any control equipment (PC, media controller, PLC) which is able to send and receive ASCII text in TCP or UDP format via Ethernet. All commands are documented, no special drivers are needed. | ||
+ | |||
+ | Alternatively the Generator may be operated with binary commands formatted as MIDI channel messages. By means of a special driver direct command transfer is possible from PC-based MIDI software (sequencers for example). | ||
+ | |||
+ | Because Ethernet communication is baudrate independent, | ||
+ | |||
+ | In a most simple case - preferably for setup or debugging of installations - manual and interactive operation by keyboard and Telnet terminal is possible. | ||
+ | |||
+ | The actual lighting scene is buffered internally. It is permanently transmitted at the DMX bus until it is modified by another command. Interruption of the Ethernet connection has no influence on the DMX bus pattern. After interruption of the power supply, automatically preset no.0 is loaded. | ||
+ | |||
+ | Data traffic is signalled by the red/green dual LED " | ||
+ | |||
+ | ===== Further Information ===== | ||
+ | [[http:// |
dmx_interfaces/cinetix_ethernet_dmx_generator_box.txt · Last modified: 2013/03/12 22:03 by 127.0.0.1